Outlets sit low on the wall, they have holes just the right size for tiny fingers, and they're in every room. That makes them one of the first things a crawling baby finds, and one of the first things to babyproof.
The good news: outlets and cords are some of the fastest childproofing jobs in the house. Here's how to tell what kind of outlets you have, which cover fits each one, and how to handle the cords that come with them.
The quick answer: Start babyproofing outlets before your baby starts crawling, around 4 to 6 months. Check whether your outlets are tamper-resistant (marked "TR"). Then cover outlets you rarely use with plug covers or sliding plates, enclose outlets that always have something plugged in with an outlet cover box, and get cords, chargers, and blind cords out of reach.
Why outlets matter
From 1991 to 2001, more than 24,000 children under 10 were treated in U.S. emergency rooms after poking objects like keys, hairpins, and paperclips into outlets. That's almost 7 children a day, according to the Electrical Safety Foundation International (ESFI), which analyzed Consumer Product Safety Commission data. (ESFI)
Cords add other risks. A toddler can chew a cord, put a live phone charger in their mouth, or pull a lamp or appliance down on themselves.
Step 1: Check whether your outlets are tamper-resistant
Look closely at an outlet. If you see the letters "TR" stamped on the face, it's a tamper-resistant receptacle (TRR). TRRs have built-in shutters that only open when both prongs of a plug push in at the same time. A key or paperclip pushed into one slot won't get through.
Since 2008, the National Electrical Code has required TRRs in new homes. Older homes, many rentals, and outlets that were never replaced often don't have them. (ESFI)
If your outlets are TR: they already block most of the "stick something in the slot" risk. You'll still want to manage cords and in-use outlets (Step 3 and Step 4).
If they aren't: an electrician can swap them for TRRs, which is the most permanent fix. Many families, and especially renters, use covers instead, or start with covers and upgrade over time.

Step 2: Cover the outlets you rarely use
For outlets that sit empty most of the time, such as behind the crib, along the hallway, or low in the playroom, you have two main options.
Outlet plug covers push into the slots and block them. They're inexpensive, nothing needs to be installed, and they work well for renters. Our Electrical Outlet Plug Covers are clear, so they blend into the wall, and a small notch lets an adult pop them out with a fingernail.
Plug covers only protect when they're actually in the outlet, so use them the smart way:
- Choose a snug fit. Test each cover after you install it. Tug it the way a toddler would. If it comes out easily, try a different outlet or option.
- Put it back right away. Most outlet accidents happen in the minutes after a vacuum or phone charger gets unplugged and the cover sits on the floor.
- Treat loose covers like small parts. Keep spares in a drawer, not on the floor, so they never end up in a baby's mouth.
- Check them as your child grows. Lab testing has found that some 2- to 4-year-olds can remove certain brands of outlet caps. (ESFI) Once your toddler shows interest, consider moving high-traffic outlets to TRRs or sliding covers.
Sliding outlet plates replace your wall plate with one whose shutters snap closed when you unplug something. They take a screwdriver to install, but there's nothing to lose or forget.

Step 3: Enclose the outlets that are always in use
Plug covers can't help when something is already plugged in, like the lamp, the TV, the baby monitor, or the laptop charger. Those outlets are often the most tempting ones, because there's a cord to pull.
An outlet cover box fits over the whole outlet, plugs included, and closes around the cords. Our Electrical Outlet Cover Box replaces your wall plate in three steps with a screwdriver. It fits standard and bulky plugs, lets cords exit from the top or bottom, and opens when an adult presses the release.
Good spots for cover boxes:
- behind the TV and entertainment center
- beside the nursery glider (monitor, sound machine, lamp)
- under the desk
- the bedside table, where phones charge
Which outlet cover goes where?
| Option | Best for | Install | Things to know |
|---|---|---|---|
| Tamper-resistant outlets (TRR) | Every outlet, permanently | Electrician | Required in new construction since 2008; nothing to remember |
| Outlet plug covers | Outlets you rarely use; renters | Push in | Must be put back after every use; choose a snug fit |
| Sliding outlet plates | Outlets you use now and then | Screwdriver | Close by themselves when unplugged |
| Outlet cover box | Outlets that are always in use | Screwdriver | Covers plugs too, so cords can't be yanked out |
| Heavy furniture in front | Hidden outlets | None | Only if the furniture is anchored to the wall |
Step 4: Get cords out of reach
Covered outlets solve only half the problem. Cords are next.
Phone and tablet chargers. A charger left plugged in with nothing attached is still live, and small children can get severe electrical burns from chewing on charger cords. Unplug chargers when you're done, and charge devices up high. (University of Iowa Stead Family Children's Hospital)
Lamp and appliance cords. A dangling cord is an invitation to pull. Route cords behind furniture, use cord covers or raceways along baseboards, and wind up extra length. In the kitchen, keep kettles, slow cookers, and coffee makers pushed back with their cords off the counter edge.
Extension cords and power strips. Use them as little as possible in rooms where your baby plays. When you do need one, choose a UL-listed strip, cover unused sockets, and tuck it behind furniture or inside a power strip cover.
Window blind cords. These aren't electrical, but they're one of the most serious cord hazards in the home: a child can strangle on one in moments, even with an adult nearby. The CPSC says cordless window coverings are the only way to remove the risk. If you can't replace yours yet, keep cribs, beds, and furniture away from windows, and tie cords up high and out of reach. (CPSC)
Bathroom appliances. Keep hair dryers, curling irons, and electric toothbrush chargers unplugged and away from the sink and tub when you're not using them.
A quick room-by-room checklist
- Nursery: cover box for monitor and sound machine; plug covers for empty outlets; crib away from windows and cords
- Living room: cover box behind the TV; cords routed behind furniture; TV and furniture anchored
- Kitchen: appliances pushed back; cords off the counter edge
- Bedrooms: chargers unplugged or moved up high; bedside outlets covered
- Bathroom: small appliances unplugged and stored away from water
For the rest of the house, see our room-by-room childproofing checklist.

Frequently asked questions
When should I start babyproofing outlets? Before your baby is on the move, ideally around 4 to 6 months. Crawling can start suddenly, and outlets are often the first thing a new crawler reaches. Our guide to when you actually need each childproofing step walks through each stage.
Are outlet plug covers safe? Yes, when they fit snugly and are put back right after each use. Test each one by tugging it, store spares out of reach, and check again once your toddler starts trying to pry things open.
Do I need covers if my outlets are tamper-resistant? TR outlets block objects pushed into a single slot, so many families skip plug covers on them. Outlets with something plugged in still benefit from a cover box, so cords and plugs can't be pulled out.
How can I tell if an outlet is tamper-resistant? Look for "TR" stamped on the outlet face. Homes built or rewired after 2008 usually have them, but it's worth checking each outlet.
What should I do if my child gets an electrical shock? If your child is touching a live source, don't touch them directly. Turn off the power first if you can. Then call 911 or your pediatrician right away, even if your child seems fine, because electrical injuries aren't always visible on the outside.
The real takeaway
Babyproofing outlets and cords takes an afternoon and a screwdriver. Check for "TR," cover the outlets you rarely use, box in the ones that are always in use, and get cords, chargers, and blind cords out of reach. Then get on your hands and knees and look again from your baby's level.
Explore Jool Baby's child safety collection to build your outlet and cord kit.
